Decorative Concrete Cure & Seal – Seal –  Enhances and darkens the concrete surface

Suitable for interior or exterior use on new or existing architectural concrete, burnish block, terrazzo, brick, stone, slate, quarry tile or other cementitious materials. Ideal for exposed aggregate, stamped/stenciled concrete, colored concrete surfaces, paving block, patio stone, driveways and garage floors. When used interior, solvent odor may linger. Extinguish all ignition sources and provide proper ventilation.

UV Stable 25% Solids High Gloss Concrete Cure & Seal – Kure & Seal 1315

Kure & Seal 1315 Application Uses.

Single Step Cure – Seal – Weatherproofing New/Existing Concrete

TK-ONE STEP is a clear, penetrating, acrylic copolymer, siloxane blend, that acts as an easy single-step application to cure, seal, and weatherproofing for new and existing concrete. TK-ONE STEP eliminates excess steps for curing and protecting concrete, allowing a faster return to service for the treated areas, when compared to traditional curing or sealing products. Additionally, the siloxane addition improves the concrete’s water repellency,  protecting it against the detrimental effects of freeze/thaw cycles and salt intrusion.

Colloidal Silica Concrete Slab Finishing Aid

A reactive colloidal silica finishing aid that provides a multitude of immediate and long-term benefits to freshly placed concrete. Concrete surfaces treated with TK-SLAB ASSIST are lubricated for faster and easier finishing and prolonged workability, even when conditions are unfavorable. With 100% reactive technology, TK-SLAB ASSIST yields concrete slabs with higher density, improved durability, and lower maintenance requirements. 

Uses for Professional Colloidal Silica Concrete Slab Finishing Aid

For interior or exterior use on freshly placed, horizontal concrete surfaces.

Ready-to-Use Concrete Repellent for Water and Deicing Agent Damage – Salt Protector Plus

TK’s Salt Protector Plus is a ready-to-use, waterborne, low VOC, penetrating, silane/siloxane blend. Engineered to prevent damage from de-icing agents, salts, and freeze damage. Salt Protector Plus is formulated to penetrate and protect residential concrete and masonry surfaces.

Uses For Salt Protector Plus for Residential Concrete and Masonry Surfaces

Salt Protector Plus is suitable for both vertical and horizontal surfaces such as:

Water-Based Salt and Water Repellent for Concrete, Brick, and Pavers – TK 290WB

TK-290 WB is a waterborne silane/siloxane, multi-substrate, salt, and water repellent. Engineered to prevent damage from environmental conditions including de-icing agents, salts, freeze damage, efflorescence, scaling, surface popping, and the damaging effects of acid rain. TK-290 WB is formulated to penetrate up to 1/8 inch (3.175 mm) and chemically bond with the substrate to become a permanent part, prohibiting salt, water, and chloride ion intrusion. This protection ensures the longest life-cycle to the substrate by preventing surface deterioration.

Uses For TK 290 WB Light Commercial Water Repellent:

TK-290 WB is suitable for both vertical and horizontal, above-grade exterior surfaces. Typical surfaces include:

Repellent Product – Salts, Deicing Agents, Freeze Thaw – TK 290 Series

TK-290 is a low viscosity, multi-substrate, salt, and water repellent. Available in standard VOC and a Low VOC option, TK-290 series is engineered to prevent damage from environmental conditions including de-icing agents, salts, freeze damage, efflorescence, scaling, and surface popping. TK-290 is a solvent-based formulation to penetrate up to 1/4 inch (6.35 mm) and chemically bond with the substrate to become a permanent part, prohibiting salt, water, chloride ion, and acid rain intrusion. This protection ensures the longest life-cycle to the substrate by preventing surface deterioration.

Uses For TK-290 Penetrate Concrete Cure and Seal

Protection for Color Concrete Exposed Aggregate and Burnished Block – Bright Kure & Seal

Bright Kure & Seal was formulated to protect architectural concrete such as exposed aggregate, colored, and stamped concrete. A 26% solids, non-yellowing, cure and a seal made from pure 100% acrylic. It has been tested and approved by the Minnesota (DOT) Department of Transportation for the curing of decorative concrete surfaces. Available in a gloss and matte finish.

Bright Kure & Seal Application Uses.

Bright Kure & Seal suitable for interior or exterior use on new and existing surfaces. Ideal for exposed aggregate and colored concrete surfaces, paving block, patio stone, driveways, and garage floors:

Light Traffic Clear Acrylic Copolymer Concrete Curing and Sealing 25% Solids – AK-2

AK-2 is the ideal concrete cure and seal for residential sidewalks, driveways, garages, and patios. AK-2 is a solvent-based, 25% solid, clear, acrylic copolymer resin and fast-drying aromatic hydrocarbon that delivers the industry’s best moisture retention.

AK-2 Cure and Seal for Interior or Exterior Applications both New and existing Concrete.

Commercial Grade Acrylic Methyl Methacrylate Cure and Seal Meets ASTM 1315 & 309 – AS-1

Achro Seal 1 (AS-1) is a commercial grade, non-yellowing, concrete cure and seal that meets ASTM 1315 and 309 standards. AS-1 is a 25% solid, clear, penetrating, high-quality acrylic/methyl methacrylate resin used to properly cure concrete and protect industrial, commercial, retail, and multi-family housing concrete surfaces. These surfaces include new and existing parking garages, parking lots, walkways, drives, and food processing plants.

Uses For TK AS-1 Non-yellowing Concrete Cure and Seal