Concrete Cure and Seal Products – TK Products https://tkproducts.com Concrete Sealers Cure and Seal and Construction Air & Vapor Barriers Tue, 16 Jul 2024 20:51:44 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://tkproducts.com/wp-content/uploads/2018/05/cropped-TK-Products-32x32.jpg Concrete Cure and Seal Products – TK Products https://tkproducts.com 32 32 ULTRA DIAMOND SEAL – DECORATIVE CONCRETE CURE & SEAL https://tkproducts.com/product/ultra-diamond-seal-decorative-concrete-cure-seal/ Wed, 14 Sep 2022 21:45:13 +0000 https://www.tkproducts.com/?post_type=product&p=13172 Ultra Diamond Seal is a blend of 100% methyl and ethyl methylate polymers used as a superior and specialized compound for curing and sealing exposed aggregate, stamped/stenciled concrete and other decorative concrete and masonry surfaces. Formulated specifically for decorative concrete applications where a glossier one coat spray or roller applied finish is desired. TK-Ultra Diamond Seal enhances and darkens the concrete surface providing a beautiful and durable high gloss finish. 

 

Get Best Price on Bright Cure and Seal

The post ULTRA DIAMOND SEAL – DECORATIVE CONCRETE CURE & SEAL appeared first on TK Products.

]]>

Decorative Concrete Cure & Seal – Seal –  Enhances and darkens the concrete surface

Suitable for interior or exterior use on new or existing architectural concrete, burnish block, terrazzo, brick, stone, slate, quarry tile or other cementitious materials. Ideal for exposed aggregate, stamped/stenciled concrete, colored concrete surfaces, paving block, patio stone, driveways and garage floors. When used interior, solvent odor may linger. Extinguish all ignition sources and provide proper ventilation.

  • Coating dries clear and does not yellow with age or exposure to ultraviolet rays.
  • Provides superior protection against freeze/thaw cycles, deicing salts, and chemical erosion and efflorescence.
  • Reduces the possibility of aggregate popouts on exposed aggregate by percolating down and around the stones to fill gaps and voids.
  • Forms a durable long-lasting film with resistance to water, chemicals, abrasion and stains. 
  • Highlights and preserves the natural pigments in the surface, adding longevity and sparkle to the finished product. 
  • Does not discolor with over-use. 

The post ULTRA DIAMOND SEAL – DECORATIVE CONCRETE CURE & SEAL appeared first on TK Products.

]]> Solvent-Based Clear Acrylic Concrete Cure & Seal 25% Solids – Kure and Seal 1315 https://tkproducts.com/product/solvent-based-clear-acrylic-concrete-cure-seal/ Thu, 20 Jun 2019 20:15:26 +0000 https://www.tkproducts.com/?post_type=product&p=2122 Kure and Seal 1315 is a solvent-based, clear, acrylic resin compound for curing, sealing, and hardening new concrete and existing concrete and masonry surfaces. The 25% solids content provides an excellent high gloss, UV stable finish. Kure & Seal 1315 is an ideal cure for freshly placed concrete, or when used as a sealer and dust-proofer for existing concrete.

The post Solvent-Based Clear Acrylic Concrete Cure & Seal 25% Solids – Kure and Seal 1315 appeared first on TK Products.

]]>

UV Stable 25% Solids High Gloss Concrete Cure & Seal – Kure & Seal 1315™

Kure & Seal 1315 Application Uses.

 

• Fresh Concrete
• Rough or Smooth Finish Concrete
• Concrete Flatwork
• Light Commercial

• Precast Concrete
• Poured Concrete Walls
• Residential Driveways and Walkways
• Concrete Curbing and Borders

Ahora Disponible , Datos de producto en espanol para TK Products Bright Kure and Seal 1315™

The post Solvent-Based Clear Acrylic Concrete Cure & Seal 25% Solids – Kure and Seal 1315 appeared first on TK Products.

]]> Single Step Clear Penetrating Concrete Cure, Seal, for Weatherproofing – New – Existing Cement – ONE STEP™ https://tkproducts.com/product/single-step-clear-cure-seal/ Thu, 06 Jun 2019 13:05:50 +0000 https://www.tkproducts.com/?post_type=product&p=1748 TK Products One-Step™ is a Penetrating Concrete Sure Seal that Waterproofs for new and Existing Concrete Surfaces. TK One Step™ Can be used in both Commercial and Residential Applications.

Get Best Price on TK One-Step™

The post Single Step Clear Penetrating Concrete Cure, Seal, for Weatherproofing – New – Existing Cement – ONE STEP™ appeared first on TK Products.

]]>

Single Step Cure – Seal – Weatherproofing New/Existing Concrete

TK-ONE STEP™ is a clear, penetrating, acrylic copolymer, siloxane blend, that acts as an easy single-step application to cure, seal, and weatherproofing for new and existing concrete. TK-ONE STEP eliminates excess steps for curing and protecting concrete, allowing a faster return to service for the treated areas, when compared to traditional curing or sealing products. Additionally, the siloxane addition improves the concrete’s water repellency,  protecting it against the detrimental effects of freeze/thaw cycles and salt intrusion.

• Transportation and Infrastructure
• Meat, Poultry, and Food Processing Plants
• Warehousing, Storage, and Business Parks
• Basement Floors, Driveways, Sidewalks, and Patios
• Parking Ramps and Garages
• Concrete Ramps and Bridge Decks

• Fresh or Existing Concrete
• Architectural and Decorative Concrete
• Pavers / Brick / Block
• Stone
• Industrial
• Commercial
• Residential

TK One-Step™ Surface Coverage
Curing, Broomed: 300 square feet per gallon
Curing, Troweled: 350 to 550 square feet per gallon
Dustproof/Seal: 300 to 500 square feet per gallon
Second Coat: 400 to 800 square feet per gallon
Renovation: 300 to 400 square feet per gallon

APPLICATION PROCEDURES
Preparation:
Surfaces must be clean, dry, and free from oil, grease, dust, or dirt. At this point, a small test area should be applied in an inconspicuous location to test the compatibility of the coating with the prepared substrate. Allow the coating to dry and cure fully, then inspect for proper film formation, gloss, adhesion and confirm that the film is free from whitening or any other defects.
Mixing:
The material is ready for use and requires no mixing or dilution. It is unlawful to further dilute with non-exempt solvents.
Application:
TK-ONE STEP WILL DARKEN CONCRETE.
New Concrete Application: Finish trowel and allow surface water to completely dissipate. Immediately apply the product once surface water has dissipated. Use a low pressure (20 to 30 lbs.) sprayer or power sprayer and apply uniformly at the specified rate of coverage. Avoid heavy accumulations. Existing Concrete Application: Use a long nap applicator or a paint roller to distribute the compound more evenly. Back rolling is highly recommended. Avoid heavy accumulations. An airless sprayer or low-pressure spray equipment may be used on larger application areas. A second coat should be applied to surfaces that are very porous and where
absorption is rapid. Allow the coating to become tack-free between coats.
CLEAN UP
Use TK-00 XYLENE* to clean tools and equipment. Pump solvent through the sprayer to remove residue of materials which can clog the hose and wand assembly.

The post Single Step Clear Penetrating Concrete Cure, Seal, for Weatherproofing – New – Existing Cement – ONE STEP™ appeared first on TK Products.

]]> Protection for Color Concrete Exposed Aggregate and Burnished Block – Bright Kure & Seal https://tkproducts.com/product/dot-concrete-cure-seal/ Thu, 07 Mar 2019 21:38:54 +0000 https://www.tkproducts.com/?post_type=product&p=1459 TK Product's Bright Kure & Seal is a 100% Acrylic concrete cure and seal that is 26% solids. Formulated in a gloss or matte finish, TK's cure and seal has been approved by the Department of Transportation (DOT) in the use of curing decorative concrete surfaces in some states. Bright Kure & Seal can be used in interior and exterior on both freshly poured concrete as well as existing concrete surfaces for ultimate protection.

Get Best Price on Bright Cure and Seal

The post Protection for Color Concrete Exposed Aggregate and Burnished Block – Bright Kure & Seal appeared first on TK Products.

]]>

Protection for Color Concrete Exposed Aggregate and Burnished Block – Bright Kure & Seal

Bright Kure & Seal was formulated to protect architectural concrete such as exposed aggregate, colored, and stamped concrete. A 26% solids, non-yellowing, cure and a seal made from pure 100% acrylic. It has been tested and approved by the Minnesota (DOT) Department of Transportation for the curing of decorative concrete surfaces. Available in a gloss and matte finish.

Bright Kure & Seal Application Uses.

Bright Kure & Seal suitable for interior or exterior use on new and existing surfaces. Ideal for exposed aggregate and colored concrete surfaces, paving block, patio stone, driveways, and garage floors:

  • Architectural Concrete
  • Cementitious Surfaces
  • Exposed Aggregate
  • Colored Concrete
  • Stamped Concrete
  • Stone Surfaces
  • Slate Surfaces
  • Concrete Pavers and Block
  • Sidewalks and Walkways
  • Decorative Concrete Overlays

Ahora Disponible , Datos de producto en espanol para TK Products Bright Kure and Seal

The post Protection for Color Concrete Exposed Aggregate and Burnished Block – Bright Kure & Seal appeared first on TK Products.

]]> Light Traffic Clear Acrylic Copolymer Concrete Curing and Sealing 25% Solids – AK-2 https://tkproducts.com/product/residential-curing-and-sealing/ Thu, 07 Mar 2019 15:11:03 +0000 https://www.tkproducts.com/?post_type=product&p=1441 TK Product's AK-2 is the contractors best choice for residential curing and sealing concrete application needs. Meeting ASTM C-1315 standards with 25% solids, this cure and seal agent can be applied to both interior and exterior surfaces including driveways, sidewalks, basement floors, pool, and patio decks and can also be implemented on brick and stone surfaces for maximum curing and protection.

Best Price for TK Products AK-2

The post Light Traffic Clear Acrylic Copolymer Concrete Curing and Sealing 25% Solids – AK-2 appeared first on TK Products.

]]>

Light Traffic Clear Acrylic Copolymer Concrete Curing and Sealing 25% Solids – AK-2

AK-2 is the ideal concrete cure and seal for residential sidewalks, driveways, garages, and patios. AK-2 is a solvent-based, 25% solid, clear, acrylic copolymer resin and fast-drying aromatic hydrocarbon that delivers the industry’s best moisture retention.

AK-2 Cure and Seal for Interior or Exterior Applications both New and existing Concrete.

  • Concrete and cementitious surfaces
  • Cement based terrazzo
  • Brick Surfaces
  • Stone Surfaces
  • Architectural Concrete
  • Residential Patios, Driveways, Walkways
  • Basement Floors
  • Swimming Pool Areas
TK Products AK2 Residential Concrete Cure and Seal Product

The post Light Traffic Clear Acrylic Copolymer Concrete Curing and Sealing 25% Solids – AK-2 appeared first on TK Products.

]]> Commercial Grade Acrylic Methyl Methacrylate Cure and Seal Meets ASTM 1315 & 309 – AS-1 https://tkproducts.com/product/concrete-cure-seal-as1/ Wed, 06 Mar 2019 12:56:46 +0000 https://www.tkproducts.com/?post_type=product&p=1398 AS-1 is a 25% solid concrete cure and seal that is clear, penetrating, high-quality acrylic/methyl methacrylate resin used to properly cure and protect industrial, commercial, retail, and multi-family housing concrete surfaces that meet ASTM 1315 and ASTM 309 standards.

Get Best Price on TK Product's AS-1

The post Commercial Grade Acrylic Methyl Methacrylate Cure and Seal Meets ASTM 1315 & 309 – AS-1 appeared first on TK Products.

]]>

Commercial Grade Acrylic Methyl Methacrylate Cure and Seal Meets ASTM 1315 & 309 – AS-1

Achro Seal 1 (AS-1) is a commercial grade, non-yellowing, concrete cure and seal that meets ASTM 1315 and 309 standards. AS-1 is a 25% solid, clear, penetrating, high-quality acrylic/methyl methacrylate resin used to properly cure concrete and protect industrial, commercial, retail, and multi-family housing concrete surfaces. These surfaces include new and existing parking garages, parking lots, walkways, drives, and food processing plants.

Uses For TK AS-1™ Non-yellowing Concrete Cure and Seal

  • Concrete and cementitious surfaces
  • Cement-Based Terrazzo Surfaces
  • Brick and Stone
  • Architectural Concrete
  • Industrial Applications
  • Commercial Applications
  • Residential Applications
  • Meat and Poultry Processing Plants
  • Parking Lots and Garages
  • High traffic walkways
  • Residential Patios, Driveways, Walkways
  • Basement Floors
  • Food Processing Plants
  • Warehousing and Storage Facilities
AS1 TK Products Concrete Cure and Seal Product
AS1 TK Products Concrete Cure and Seal Product

The post Commercial Grade Acrylic Methyl Methacrylate Cure and Seal Meets ASTM 1315 & 309 – AS-1 appeared first on TK Products.

]]>